2021 China Wiskind Galvanized Steel Purlin for Steel Structure
Specifications:
| Steel yield point(σs) |
235MPa/345MPa/etc. |
| Specifications(mm:h×b×a×t) |
C80×40×20×T |
| C80×50×20×T |
| C100×50×20×T |
| C120×50×20×T |
| C120×60×20×T |
| C140×50×20×T |
| C140×60×20×T |
| C160×50×20×T |
| C160×60×20×T |
| C160×70×20×T |
| C180×60×20×T |
| C180×70×20×T |
| C200×60×20×T |
| C200×70×20×T |
| C220×70×20×T |
| C220×75×20×T |
| C250×70×20×T |
| C250×75×20×T |
| C280×70×20×T |
| C300×80×20×T |
| C300×100×20×T |
| Side screw hole(mm) |
Ø14×22 |
| Ø18×22 |
| Ø16×25 |
| Ø18×26 |
| Middle screw hole(mm) |
Ø12 |
| Ø14 |
| Ø16 |
| Ø18 |
| Painted or not |
Optional.If need it, midgray and dark red is more common. |
|
|
Product Description
Our steel purlins are roll-formed from Hi-Tensile Galvanised steel. They are primarily used to provide lightweight, economical, efficient roofing and cladding support systems for framed structures. Our hot dip galvanized purlins are available in a range of different sizes and configurations.As the purlins are pre-punched in our factory, they are quick to install and suitable for both insulated and uninsulated roofs and walls.
C purlin & Z purlin product description
Features:
1.Manufactured from high tensile galvanized steel
2.Despotic C & Z section steel , Z section steel is roll- formed from galvanized steel ,specification to be complete.
3.Make from quality raw material.
4.Pre-punched holes based on detail design.
5.Complete assessories package available.
6.C purlin, Z purlin and H beam are widely used in factory buildings,large -span bridges,gymnasiums and portable houses.
7.C purlin may be used in single spans and continuous spans in multi-bay buildings.
8.We can make adjustment to meet your inquiries as we can do.
Steel Purlin typically refers to roof framing members that span parallel to the building eave, and support the roof decking or sheeting. The purlins are in turn supported by rafters or walls. Purlins are most commonly used in Metal Building Systems, where Z-shapes are utilized in a manner that allows flexural continuity between spans.
It is the practice in the steel industry that structural shapes are assigned representative designations for convenient shorthand description on drawings and documentation: Channel sections, with or without flange stiffeners, are usually referenced as C shapes; Channel sections without flange stiffeners are also referenced as U shapes; Point symmetric sections that are shaped similar to the letter Z are referenced as Z shapes. Section designations can be regional and even specific to a manufacturer. In steel building construction, secondary members such as purlins (roof) and girts (wall) are frequently cold-formed steel C, Z or U sections, (or mill rolled) C sections.
Cold formed members can be efficient on a weight basis relative to mill rolled sections for secondary member applications. Additionally, Z sections can be nested for transportation bundling and, on the building, lapped at the supports to develop a structurally efficient continuous beam across multiple supports.
FAQ:
Q1: Can you offer designing service for us?
A: Yes, we have more than 50 design engineers. We could design full solution drawings as per your requirements. They use software, such as: Auto CAD, PKPM, MTS, 3D3S, Tarch, Tekla Structures(Xsteel)V12.0. etc. We will be glad to establish sincere business cooperation with you in the near future.
Q2: Do you offer guiding service for installation on site overseas?
A: Yes. We do. We will give detailed installation drawings and video for free. And if you need, we can send guide engineers as installation director even a working team to your construction site. We have ever supplied the installation service on Australia,Cameroon, Bolivia, Chile, Angola, Gabon and etc.
Q3: How can I get your quick quotation on my project?
A: The more exhaustive your description is, the quicker our quote would be. You can chat with us at anytime via email or phone to offer us your detail information or you can just leave your message on our website. We will give you the best quotation ASAP.
Q4: What is the procedure of trading?
A: Design drawing →Confirm drawing→Quotation→PI→ConfirmPI→Arrange 30% deposit→Manufacture→QC inspect→Pay balance→Shipping.
Q5: What is the biggest advantage of your product?
A: The quality of our products is better than other manufacturers. We use high-quality raw materials, strictly control the quality of production. We improve our product performance by improving our technology. These make our products more beautiful and have a longer life, lower cost of use.
Contact us
If you are interested in our products, please feel free to contact us!
Specifications:
){kind=link}